π‘ Stage Lighting Design Lab
You're at the lighting console. Mix red, green, and blue light into any color, aim it from the front, sides, or behind your performer, save every look as a cue β then press GO and run your show.
π‘ Fixtures β pick a light, then mix its color
π¨ Looks β one-click starting points
π¬ Cue Stack β save looks, then run the show
Designerβs Read
Observe: Front light is doing the storytelling work now. Add a side fixture, then compare the performerβs shape.
π Pre-Production Lighting Craft: McCandless Angles, Fixtures & DMX Patching
1. The McCandless 45Β° Method (1932)
Stanley McCandless showed that a single dead-center front light flattens an actorβs face, while a steep 90Β° top light casts hollow eye-socket shadows. Hang two front lights at 45Β° above and 45Β° left/right of each acting areaβone warm key (e.g., R02 Bastard Amber) and one cool fill (e.g., L201 Steel Blue)βto sculpt natural 3D faces.
2. Four Stage Fixture Families
ERS / Leko (Ellipsoidal): Sharp beam, 4 framing shutters to cut spill off the pit/arch, and a slot for metal or glass gobos.
Fresnel: Stepped lens with a soft, blendable edge and rotatable barn doors.
PAR / LED Wash: Punchy, saturated color washes for musical numbers.
Cyc / Strip Light: Asymmetric flood banks for the upstage sky drop.
3. Light Plot, Hang, Focus & DMX512
In pre-production, the Lighting Designer drafts a scaled Light Plot and Instrument Schedule listing every fixtureβs electric pipe (FOH Cove, 1st Electric), unit number, lens angle, gel, control channel, and DMX512 address (512 channels per universe; an RGBW LED fixture uses 4+ consecutive addresses). Patch a full rig in the DMX Patch Lab.
4. Connect to Ground Plan & Cue Sheet
Match your lighting specials to the exact acting areas on your Stage Plot (such as the R.C. rocky arch in The Pirates of Penzance), then record every saved cue number and fade time into your Theatre Cue Sheet.