Audio, Lighting & Production Technology · Grades 9–12
White Balance & Color Temperature
Every light source has a color, measured in degrees Kelvin — candlelight is warm and orange, overcast sky is cool and blue. A camera has to be told which one it's looking at, or every shot comes out tinted. Pick a real light source, then dial in white balance until skin tone reads neutral.
Interactive: Match the Light
Choose a light source, then slide White Balance until the preview looks neutral — not orange, not blue.
Go Deeper: The Kelvin Scale & CRI
Color temperature runs from warm/orange at low Kelvin (candlelight ≈ 1900K) to cool/blue at high Kelvin (open shade ≈ 8000K) — the opposite of how "warm" and "cool" sound, since higher-temperature stars really do glow bluer. CRI (Color Rendering Index) is a separate number: it measures how accurately a light source reveals true colors, on a scale to 100. A light can be perfectly white-balanced and still have poor CRI — meaning skin and fabric colors look slightly wrong no matter how you correct the tint, because the light itself is missing parts of the color spectrum. That's why productions care about high-CRI bulbs, not just correct Kelvin.
Theatrical & Musical Production: Stage Gels, Dimmer Red-Shift & Multi-Camera Matching
When filming or livestreaming a musical production, camera operators must coordinate directly with the Lighting Designer (Stage Lighting Lab) before tech rehearsal:
- 1. Never Use Auto White Balance (AWB) on a Lit Stage: If the Lighting Designer cues a 6500K moonlight blue wash for a night scene in The Pirates of Penzance or a warm 2200K amber sunset for Newsies, an AWB camera tries to "fix" the color back to neutral grey—erasing the lighting designer’s storytelling! Always lock stage cameras to a fixed manual Kelvin setting (typically 3200K for halogen/tungsten rigs or 4200K–5000K for mixed LED/followspot rigs).
- 2. Tungsten Dimmer Red-Shift ("Amber Drift"): Traditional 3200K theatrical halogen lamps cool down physically when dimmed: at 100% intensity they burn at 3200K, but dimmed to 35% for a quiet ballad, the filament drops to ~2100K (candlelight amber). Modern theatrical LED fixtures include a Tungsten Red-Shift Emulation curve so LEDs warm up smoothly alongside halogen Lekos.
- 3. Multi-Camera Matching & Color-Correction Gels: In a 2- or 3-camera shoot (Wide Center + Left/Right Close-up), every camera must be dialed to the exact same Kelvin number and tint so editing between angles never jumps from warm to cool. When mixing a 5600K arc followspot with 3200K stage washes, lighting crews drop a CTO (Color Temperature Orange) gel frame into the followspot to bring it down to 3200K.
Test a Stage Lighting Scenario in the Simulator Above:
Practice Problems
Easy1. Which light source has the lowest color temperature (warmest, most orange)?
Easy2. If your white balance is set way higher (cooler) than the actual light, the image looks...
Medium3. A crew films half a scene under tungsten light (3200K) and half under daylight (5600K) with the same fixed white balance setting. What's the risk?
Medium4. Two lights both read exactly 5600K, but one has CRI 95 and the other CRI 70. Does matching Kelvin alone guarantee matching color?
Challenge5. A cinematographer intentionally sets white balance to 3200K while shooting outdoors in daylight (5600K). Why might they do that on purpose?