Blender walkthrough, examples and deeper reference

Start with the editable technique workshop above. Reuse your model in the next lesson. The detailed walkthrough below uses Blender; choose another app using Tool Rosetta and the transfer checklist above.

Product & Prop Modeling · Two 45-minute sessions · Grades 7–12

Build a reusable chair

Make a measured chair for your modular room. Build four source pieces on the right, reflect them across the center, and soften the edges so light reveals the form.

Finish line: one chair, 0.45 m wide × 0.45 m deep × 0.90 m tall, saved as a reusable collection in 03-chair.blend.

Blender Manual example of a mesh with matching left and right sides after Symmetrize.
LOOK: matching sidesThis authentic Blender Manual example demonstrates Symmetrize, a one-time edit. Our chair uses a live Mirror modifier instead. Compare corresponding corners across the center. Source: Blender Manual, CC BY-SA 4.0.

From workshop pattern to digital prototype

Furniture design joined craft, measurement, and repeatable production long before 3D software.

A chair must fit bodies, materials, tools, and a room. Makers once developed full-size drawings, templates, jigs, and physical prototypes. Industrial production increased the need for standardized dimensions and repeatable parts; digital models now let designers test those decisions before cutting material.

Template and prototype

Patterns and jigs repeated angles and parts, while a physical mock-up revealed comfort and balance.

Standardize the part

Measured drawings supported interchangeable pieces, production planning, and controlled variation.

Parameter and mirror

Dimensions, symmetry, and non-destructive modifiers turn one tested half into an editable whole.

Design question: Which measurements describe appearance, and which ones protect the person who will actually sit in the chair?

History connection: Computer History Museum: structured drawings and instances in Sketchpad

Big ideaDimensions are constraints: they describe what the chair must be, not just how it looks.
PredictA mirror only gives a correct result when its plane and origin are in the right place.
TestMeasure the finished chair and compare matching left and right corners.
Why it mattersSymmetry turns one careful source into a consistent, editable whole.

Your studio plan

Make
A four-legged chair with a 45 cm seat height, live X symmetry, and 3 mm bevels.
Before you start
Complete Lesson 01; know how to select, orbit, enter dimensions, and switch Object/Edit Mode. Use Blender's default keymap. No previous model is required; keep your window file for Lesson 04.
Pace
Session 1: plan and build source halves (40–45 min). Session 2: Mirror, Bevel, and handoff (40–45 min). Allow another 15 min for first-time troubleshooting.
Keep for later
Save 03-chair.blend with a Chair collection and Chair_Root control at floor level. Lesson 04 places it in a room built from 2 m panels; Lesson 07 can render it.

Measure before you model

A chair is a set of constraints.

Use this starter brief: X = width, Y = depth, Z = height. The floor is Z = 0, the chair faces −Y, and its back is at +Y. The seat top is Z = 0.45 m and the back top is Z = 0.90 m. These are practice dimensions, not a fit standard for every person.

  1. LOOK → Record the brief

    Sketch front and side views. Label overall 0.45 × 0.45 × 0.90 m, seat thickness 0.04 m, and seat top 0.45 m. Measure a nearby chair and note one difference.

  2. DO → Prepare a clean file

    Save any open work, then File → New → General. In the 3D Viewport, Object Mode, press A, then X and confirm to remove the starter objects. In Properties → Scene → Units, choose Metric, Unit Scale 1, Length Meters. Use Object → Snap → Cursor to World Origin. All new cubes start there.

  3. DO → Save a project, not a screenshot

    File → Save As: create a folder you can find again and save 03-chair.blend. Type units such as 0.45 m directly into numeric fields. Directions below follow the Blender 4.5 Manual; menu search F3 helps locate a named command if your layout differs.

CHECKExplain why the seat's center is Z = 0.43: 0.45 − half its 0.04 thickness. Its bottom is 0.41, so legs 0.41 m long meet it exactly.
REPAIR → Numbers or shortcuts behave strangely?

Hover the 3D Viewport before shortcuts; Tab changes the mode there. Verify Metric and Unit Scale 1 before entering dimensions. Changing the unit display alone does not resize existing geometry. Re-enter the dimensions from the next section if necessary.

Four source boxes

Build the right half, with exact numbers.

DO: For each card, return to Object Mode, use Add → Mesh → Cube, press F2 to name it, then open Sidebar (N) → Item → Transform. Enter Dimensions first, then Location. Leave Rotation at 0°. Finish each cube with Object → Apply → Scale; all three Scale fields should read 1. These locations describe box centers before the origin changes.

1

Seat

Dimensions X / Y / Z:
0.225 / 0.45 / 0.04 m

Location X / Y / Z:
0.1125 / 0 / 0.43 m

The source spans X = 0 to +0.225. Mirror will make its width 0.45 m.

2

Backrest

Dimensions X / Y / Z:
0.225 / 0.04 / 0.45 m

Location X / Y / Z:
0.1125 / 0.205 / 0.675 m

Its bottom meets the seat top; its rear face aligns with the seat's rear edge.

3

Legs_Front

Dimensions X / Y / Z:
0.05 / 0.05 / 0.41 m

Location X / Y / Z:
0.175 / −0.175 / 0.205 m

One complete leg, inset from the seat edge. Mirror creates its partner.

4

Legs_Rear

Dimensions X / Y / Z:
0.05 / 0.05 / 0.41 m

Location X / Y / Z:
0.175 / +0.175 / 0.205 m

The two source legs have equal heights and different Y locations.

LOOK → CHECKUse View → Viewpoint → Front, then Right. You have half a seat, half a back, and two complete legs, all at X ≥ 0. Both feet meet Z = 0; no part is below the floor. In front view the rear leg hides behind the front leg; orbit to see both.

Open the two center faces before mirroring.

  1. DO → Isolate Seat

    Select Seat only. Use View → Local View → Toggle Local View, then View → Viewpoint → Left. This looks from −X toward the face lying at X = 0.

  2. DO → Remove only that face

    Press Tab for Edit Mode, click Face Select in the viewport header (or top-row 3), and turn X-Ray off. Use Select → None, then click the single rectangular face facing you. Press X → Only Faces. Keep its boundary edges and vertices.

  3. CHECK → Repeat for Backrest

    Orbit: Seat is an open-ended five-face box. Return to Object Mode and toggle Local View off. Repeat for Backrest. Keep all six faces on both legs: neither leg touches the mirror plane.

REPAIR → A box vanished or several walls disappeared?

Undo once. Isolate one object, use Left view, Face Select, X-Ray off, and deselect all before clicking one face. Choose Only Faces, not Vertices. The selected face must be the center-facing end, not the outer end at X = +0.225.

Save point 1 · 03-chair.blend

Save after checking the two open center faces. Keep working in this file. At this stage two halves are deliberately open; Mirror closes the evaluated seat and back in the next section.

Reflection as a design rule

Choose the plane, then reflect.

For our unrotated objects, X Mirror reflects across the YZ plane at X = 0: (x, y, z) becomes (−x, y, z). It uses the object's origin and local axes unless a Mirror Object is assigned. Our shared origin will be the floor center.

  1. DO → Put every origin on the same plane

    Object Mode: reset the cursor with Object → Snap → Cursor to World Origin. Select the four meshes and use Object → Set Origin → Origin to 3D Cursor. Geometry stays in place; each origin and Location is now (0, 0, 0). Do not re-enter the earlier box-center locations after this.

  2. DO → Mirror one part at a time

    Select only Seat. Open Properties → Modifiers (wrench) → Add Modifier, search Mirror, and add it. Enable X only; leave Y, Z, and Bisect off and Mirror Object empty. Enable Merge with distance 0.001 m and Clipping. Repeat for Backrest, Legs_Front, and Legs_Rear.

  3. CHECK → Source and result are different measurements

    In Object Mode, Seat's evaluated Dimensions should read 0.45 × 0.45 × 0.04 m. Its editable source is still only 0.225 m wide. Each mirrored leg object has an overall X bounding width of 0.40 m, including the gap; each individual leg remains 0.05 m wide. Do not type the source dimensions over these evaluated dimensions.

  4. CHECK → Test a reversible edit

    Select Legs_Front, enter Edit Mode, select all its source vertices, then G X 0.01 Enter. Both front legs move outward symmetrically. Undo once and return to Object Mode. Four mesh objects now display a seat, a back, and four legs.

Clipping is a boundary; Merge is a weld.

Clipping holds center vertices on the plane during Edit Mode movement. Merge joins mirrored vertex pairs within its distance threshold. Neither removes arbitrary overlapping boxes or internal faces. Removing the two center caps in the previous section prevents duplicate faces inside the seat and back.

Blender Manual mesh before Symmetrize, showing visibly different geometry on its left and right sides.
LOOK: compare corresponding featuresThe Manual's “before Symmetrize” example has unmatched sides. It is a visual comparison exercise, not a screenshot of a broken Mirror modifier or our chair. In your chair, compare foot heights and seat corners in Front view. Blender Manual, CC BY-SA 4.0; image provenance.
REPAIR → Doubled widths, gaps, or mirrored pieces on top of each other?
  • Mirror settings: X only, Mirror Object empty. Object Rotation should still be 0° and Scale 1.
  • Overlapping legs or misplaced origins: confirm the origin is at (0, 0, 0). Use Shift+S → Cursor to World Origin, then Object → Set Origin → Origin to 3D Cursor. Never use Geometry to Origin for parts that need to mirror across the center of the chair.
  • Seat width 0.90 m: you probably built a full-width source. Undo the incorrect sizing or rebuild Seat from its source card before adding Mirror.
  • A seam remains: temporarily disable Mirror's viewport monitor icon, enter Edit Mode, and inspect the open center end. Select its four boundary vertices; S X 0, then set their median X to 0 in Sidebar → Item with local coordinates. Restore Mirror. Keep the outer half away from the plane.

Reference: Mirror modifier, axes, Merge, and Clipping.

Save point 2

Save when the chair has four feet, matching halves, and the correct evaluated width. Keep Mirror live so later edits remain symmetric.

Light reveals the edge

Make a 3 mm design decision.

Small edge bevels produce highlights that help us read a manufactured shape. A large bevel can make the same chair look soft or toy-like. This is an appearance study; the model does not demonstrate a safe load-bearing joint.

  1. DO → Add Bevel after Mirror

    On each mesh, Properties → Modifiers → Add Modifier, search Bevel. Keep it below Mirror. Set Affect to Edges, Width Type to Offset, Amount/Width to 0.003 m, Segments to 3, and Limit Method to Angle, 30°. Leave Clamp Overlap on. A merged flat center seam should not receive a bevel.

  2. LOOK → Compare under the same light

    Orbit close in Solid shading. Toggle Bevel's viewport monitor icon off and on. Identify a new strip of geometry around an outside corner. Return it to on. Three millimeters is 7.5% of the seat's 40 mm thickness; calculate what 12 mm would be before trying it briefly and restoring 3 mm.

  3. DO → Control the shading

    For each mesh in Object Mode, use Object → Shade Auto Smooth. In Blender 4.5 this adds Smooth by Angle at the end of the stack. Set its Angle to 30°. The core stack is Mirror → Bevel → Smooth by Angle. No Subdivision modifier is needed for this box-built chair.

CHECKEdges have a narrow highlight and the seat remains flat. Explain the difference: Bevel adds geometry and changes the edge silhouette; smoothing changes the lighting across faces.
REPAIR → Uneven widths, a center groove, or melted shading?
  • Uneven bevels: inspect Scale in Object Mode. Use Object → Apply → Scale, then check the 0.003 m amount again.
  • Center groove: put Mirror above Bevel, check Merge and the open center caps. Increasing bevel segments cannot repair duplicate faces.
  • Melted flat faces: use Object → Shade Flat to compare. Re-add Shade Auto Smooth and check its angle. Flat shading is a valid temporary checkpoint while you repair geometry.

References: Bevel settings, Apply Scale, and shading and Smooth by Angle.

A reusable asset

Give the room one chair to move.

  1. DO → Add a floor-level control

    Object Mode: deselect everything, snap the cursor to world origin, then Add → Empty → Plain Axes. Rename it Chair_Root. Its Location and Rotation are 0; its Scale is 1.

  2. DO → Parent the four meshes

    Select the four chair meshes in the viewport, then Shift-select Chair_Root last so it is active. Press Ctrl+P → Object (Keep Transform). In the Outliner, expanding Chair_Root should reveal Seat, Backrest, Legs_Front, and Legs_Rear beneath it.

  3. DO → Package the collection

    Select all five objects in Object Mode and press M → New Collection; name it exactly Chair and confirm. Keep the live modifiers. A collection organizes the asset; Chair_Root provides the shared transform.

  4. CHECK → Move, undo, save, reopen

    Select only Chair_Root; move it 1 m along X. Every chair part should follow. Undo, so the root returns to (0, 0, 0). Save 03-chair.blend, then File → Revert and confirm to reopen the saved version. Check that the Chair collection and live modifiers are still there.

Handoff to Lesson 04

In the room file, use File → Append → 03-chair.blend → Collection → Chair → Append. Select Chair_Root to position the chair. Its feet start at Z = 0, its seat top is 0.45 m, its total height is 0.90 m, and its back faces +Y. Save the room as its own file.

REPAIR → Some parts stay behind when the root moves?

Undo the move. Select the missing mesh in Object Mode, then Shift-select Chair_Root last and repeat Object (Keep Transform). Test again before saving. If several objects move too far, select only the root for the move; do not transform both the parent and its children together.

Optional stretch · One change, measured evidence

After saving the core chair, use Save As to make 03-chair-study.blend. Pick one change: raise the back's top by 0.10 m in Edit Mode while keeping its bottom at 0.45 m, or compare 1 / 3 / 6 mm bevels under the same view and light. Record the changed variable, an unchanged constraint, and which version communicates your intended material better. Keep 03-chair.blend as the standard room asset.

Explain with evidence

Can someone else reuse your chair?

1. Why does a 0.225 m source seat become 0.45 m wide?
2. Why delete the seat's center-facing cap?
3. Which stack finishes the mirrored shape before softening its outer edges?

Studio critiqueShow front and side views. Explain one measurement using center ± half-dimension, one symmetry check, and how your edge width affects the apparent material. Identify what this visual model cannot tell you about a real chair's strength.

Definition of done

Continue to Environments →