See what each brush changes

Choose the tool by the shape change you need, then test it on the practice surface.

Three clay profiles showing Clay Strip adding a ridge, Grab moving a broad silhouette, and Smooth softening local bumps.
Clay Strip adds mass, Grab changes the outline, and Smooth reduces small surface bumps. Original ClassroomOS teaching diagram.
Blender walkthrough, examples and deeper reference

Start with the editable technique workshop above. Reuse your model in the next lesson. The detailed walkthrough below uses Blender; choose another app using Tool Rosetta and the transfer checklist above.

Sculpting Workspace · 50–65 minutes · Grades 7–12

Sculpt a surface

Every lesson so far builds shape by moving individual vertices, edges, and faces. Sculpting flips that: you drag a brush across a dense surface and the mesh deforms underneath it, like real clay. It's the fastest way to get an organic, characterful shape down.

Finish line: a simple creature or rock form, blocked in entirely with sculpt brushes, cleaned up with a Voxel Remesh.

From clay gesture to digital surface

Digital sculpting keeps the hand-driven logic of clay while changing what “material” can do.

Traditional sculptors add, remove, press, smooth, and join material while turning the work to judge its silhouette. Early computer modeling emphasized points, edges, and typed operations. Digital sculpting brought pressure-like brushes and flexible remeshing to the screen, making form-finding feel more direct.

Add and subtract

Clay modeling and stone carving developed form through touch, silhouette, planes, and repeated viewing.

Edit the structure

Artists shaped surfaces by moving explicit control points and polygons with limited computing power.

Brush the geometry

Brushes, masks, symmetry, and remeshing let artists develop broad masses before fine topology.

Make a claim: Which part of sculpting still depends on observation rather than software—the brush, the mesh, or judging the silhouette?

Blender context: Blender Manual: version milestones and sculpting development

Big ideaSculpting changes a continuous surface; it is closer to shaping clay than moving a box.
PredictA brush cannot make a clean stroke where the mesh has too few vertices to move.
TestMake the large silhouette readable before adding creases, pores, or small details.
Why it mattersLarge forms carry the pose and character; detail cannot rescue a weak silhouette.

A dense mesh, not a low-poly one

Enter Sculpt Mode from a mesh with room to deform.

Click the Sculpting tab in the workspace bar, or use the same Object Mode dropdown you already know and choose Sculpt Mode. Sculpting works on the mesh's actual vertices — a bare cube (8 vertices) has almost nowhere for a brush to push. Start from an Ico Sphere (Shift+A → Mesh → Ico Sphere) with 2–3 subdivisions, or a mesh with a Multiresolution or Subdivision Surface modifier already applied.

Blender's Sculpt Mode workspace: the brush toolbar down the left edge, active-tool and brush-setting panels on the right showing Dyntopo and Remesh sections, and a sculpted monkey figure in the viewport.
Sculpt ModeThe left toolbar holds every brush. The right panel shows the active brush's settings, including the Dyntopo and Remesh sections used later in this lesson.
Slow computer? Lower the base densityEvery brush stroke recalculates the whole visible mesh. Start with fewer subdivisions than you think you need — you can always add more with Remesh once the big shapes are right.

Five brushes cover most of a block-in

Learn these before touching anything else.

●

Add volume

Clay Strip

Builds up flat, blocky masses. The default block-in brush — most of a form starts here.

✋

Move without stretching

Grab

Moves a whole region of the surface as one soft blob, like grabbing real clay.

◐

Settle the surface

Smooth

Averages nearby geometry — hold Shift while using any other brush to smooth instead.

▽

Cut a hard line

Crease

Pinches a sharp groove — eyelids, knuckles, the line where a jaw meets a neck.

◎

Push out or in

Inflate / Draw

Draw pushes the surface outward along its normal; Inflate rounds a region out evenly, good for muscle masses.

Brush motion trainer

Work from large form to controlled detail. The studio log records your decisions, not how “pretty” the result looks.

Current studio brief

1. Establish the silhouette

Use Clay Strip or Grab with a broad radius. Make at least three deliberate strokes before checking your work.

Clay Strip selected. Drag to build broad planes.

Brush

Mesh density: medium · 2,400 vertices

0 strokes0 brushes tried0 workflow choices

Start broad. A readable silhouette matters more than surface detail.

Repair drill

Choose a symptom, diagnose it, then load the repair.

  1. Pick a brush

    Click its icon in the left toolbar, or press its number key (X Draw is default; open the pie with V for the rest).

    Toolbar
  2. Set Radius and Strength

    Drag in the header fields, or use F (Radius) and Shift+F (Strength) while hovering the viewport.

    F
  3. Mirror your strokes

    Brush Settings → Symmetry, or the X toggle in the header — every stroke sculpts both sides of a symmetrical form at once.

    Symmetry

The mesh grows detail where you need it

Dynamic Topology adds geometry as you sculpt.

A fixed mesh runs out of detail — sculpt a deep groove into low-resolution geometry and it looks faceted, not carved. Dynamic Topology (Dyntopo) re-triangulates the surface under your brush in real time, so tight areas automatically get more geometry and open areas stay light.

  1. Turn it on

    Check the Dyntopo box in the Sculpt Mode header. Blender 4.0 dropped the old Ctrl+D default — bind your own in Preferences → Keymap if you want one back.

    Header
  2. Set detail size

    The Detail Size slider controls how fine the new triangles are — smaller means finer detail and a heavier mesh.

    Detail Size
  3. Clean up with Voxel Remesh

    Dyntopo geometry gets messy over a long session. Remesh panel → Voxel Size → Remesh (or Ctrl+R) rebuilds the whole mesh at one even resolution.

    Ctrl+R
Dyntopo and Multiresolution don't mix

Dyntopo rebuilds topology, which breaks a Multiresolution modifier's fixed level stack. Use one or the other on a given mesh, not both.

Protect what's already right

A mask stops a brush from reaching an area.

Once part of a sculpt is working, you don't want the next brush stroke to accidentally drag across it. Paint a Mask to lock that area down, or use a Face Set to name and isolate a region for other tools like Extract or Remesh.

1

Paint

Press M for the Mask brush, or open it from the toolbar, and paint over the area to protect.

2

Invert / Clear

Ctrl+I inverts the mask; Mask menu → Clear Mask removes it entirely.

3

Face Sets

Drag with the Face Set tool to paint a new named region, visible as flat-shaded color patches; hold Ctrl while dragging to expand an existing region instead of starting another.

Hands on

Block in a simple creature or rock.

  1. Start the base

    Add an Ico Sphere with 2 subdivisions, enter Sculpt Mode, and enable Dyntopo with a medium Detail Size.

    Base
  2. Rough in the big shapes

    Use Clay Strip and Grab only, at a large Radius, to establish the overall silhouette — a head, a body mass, a limb. Don't touch small detail yet.

    Clay Strip
  3. Voxel Remesh

    Once the silhouette reads correctly, run a Voxel Remesh to get one clean, even mesh to sculpt detail onto.

    Ctrl+R
  4. Add mid-level detail

    Switch to Crease and Smooth at a smaller Radius for eyelids, joints, and seams. Mirror with the X symmetry toggle if the form is symmetrical.

    Crease
  5. Mask and protect

    Mask any area you're happy with before adding more detail nearby, so a stray stroke can't ruin it.

    Mask
Brush strokes are doing nothing, or the mesh looks frozen?
  • Confirm you're in Sculpt Mode, not Object or Edit Mode — check the mode dropdown in the header.
  • A bare low-poly primitive has too few vertices to deform visibly; add subdivisions or turn on Dyntopo first.
  • Zero Strength or Radius makes a brush invisible in effect — check the header fields.
  • An active Mask blocks strokes in the masked area on purpose; clear it if you meant to sculpt there.

Exit ticket

Ready for procedural detail?

1. Why does a bare cube sculpt poorly?
2. What does Dynamic Topology do?
3. What is a Mask used for?

Definition of done

Next: Geometry Nodes →