Physics · Lesson 12

Point Wave

Wave Mechanics Point Source Circular Wavefronts Amplitude & Distance

Drop a pebble in still water and you have the perfect image of a point wave. A single source sends ripples outward in concentric rings. As they spread, the energy is shared over a growing circumference — so amplitude falls with distance.

What is a Point Wave?

A point wave (or point source wave) originates from a single location and spreads outward equally in all directions. In two dimensions (like water) the wavefronts are circles. In three dimensions (like sound or light) they are spheres.

Amplitude is the height of a crest above the resting surface. The graph in the simulator shows how the wave moves above and below that resting level.

Interference between two point sources

When two point sources emit waves of the same frequency, their circular wavefronts overlap and interfere. Where crest meets crest — constructive interference — you get a larger amplitude. Where crest meets trough — destructive interference — they cancel out. This is the basis of the famous double-slit experiment.

Concentric circular ripples propagating across the surface of calm water from a single central impact
Circular Wavefronts from a Point Source. A disturbance at a single point sends out concentric waves across a two-dimensional medium. As the rings grow, the wave spreads its energy around a longer circle and the ripples get smaller. Wikimedia Commons · CC BY-SA 4.0.
Thomas Young's historic 1803 diagram demonstrating two-point-source wave interference
Thomas Young's Two-Point Interference (1803). Young's historic drawing presented to the Royal Society shows circular wavefronts emerging from two adjacent apertures A and B. Overlapping crests reinforce along constructive rays (C, D, E, F), while crests meeting troughs extinguish each other, proving the wave principle of superposition. Thomas Young / Wikimedia Commons · Public domain.

Simulator

Click anywhere on the canvas to add a wave source (up to 3), or drag a source to move it. Watch the circular wavefronts spread and interfere — the strip below graphs the resultant amplitude along the dashed line. Use the panel to adjust frequency and speed.

Click to add · drag to move · click a source to remove
Sources1
Frequency1.0 Hz
Wavelength—

How far apart are the wave crests?

Each time the source makes a crest, the previous crest has moved outward. The distance between those crests is the wavelength. Divide the distance the wave travels in one second by the number of crests it makes in that second.

λ=vf
λ
Wavelength (say “lambda”). The distance from crest to crest, in meters.
v
Wave speed. How far a crest travels each second, in meters per second (m/s).
f
Frequency. How many crests pass a point each second, in hertz (Hz).

Try it in the simulator. Open Controls if the panel is closed. Set the speed to 4 m/s and the frequency to 2 Hz. In one second, 4 meters of wave contains 2 wavelengths, so the crests are 2 m apart. Keep the speed at 4 m/s and double the frequency to 4 Hz. The same 4 meters now contains 4 wavelengths, so the crests are 1 m apart.

Why does sound get weaker with distance?

Imagine a small alarm sending sound equally in every direction. At any distance from the alarm, picture a sphere centered on it. Farther away, the same sound power crosses a larger sphere. Each square meter of that sphere receives less power.

I= P4πr2
I
Sound intensity. Power per square meter (W/m²).
P
Total sound power from the alarm, in watts (W).
r
Distance from the alarm, in meters. This is the radius of the imagined sphere.

The bottom of the fraction, 4πr², is the sphere’s surface area. The exponent 2 tells you to multiply the radius by itself. If you double the radius, the area becomes four times as large and each square meter receives one quarter as much power. This is the inverse-square law for intensity in ideal 3D spreading.

Worked example with an alarm

An alarm emits 12.57 W of sound power. How much power per square meter reaches you at 2 m and at 6 m? Assume the sound spreads evenly with negligible absorption.

  1. Find the area at 2 m

    Square the radius first. Then multiply by 4π.

    4π × (2 m)² ≈ 50.27 m²

  2. Divide the power by that area

    12.57 W ÷ 50.27 m² ≈ 0.250 W/m²

  3. Use the change in distance to find the intensity at 6 m

    From 2 m to 6 m, the radius triples. The area grows by 3 × 3 = 9, so divide the intensity at 2 m by 9.

    0.250 W/m² ÷ 9 ≈ 0.0278 W/m²

    One ninth of the intensity remains at 6 m, or about 11%.

Compare 3D sound with 2D ripples

In the ripple model, energy spreads around a circle. Doubling the distance doubles the circle’s circumference, so the power per meter of wavefront falls to one half. In 3D, doubling distance gives the sound four times the area to spread across.

The simulator’s graph shows amplitude, the wave’s height. The energy carried by a wave scales with the square of its amplitude. So in the ideal ripple model, when the power per meter halves, the amplitude falls to about 71% of its previous height. Squaring 0.71 gives about 0.50. With one source, toggle Show amplitude decay and compare the graph near and far from the source.

Real-World Applications

💧
Water RipplesA stone dropped in a pond creates a classic point-wave pattern — circular wavefronts expanding outward with decreasing amplitude.
🔊
Sound from a SpeakerA small loudspeaker approximates a point source. Sound pressure waves spread outward, weakening with distance — why you must stand closer to hear quiet music.
📡
Radio TransmittersAn omnidirectional antenna radiates electromagnetic point waves. In open space, doubling the distance can reduce received power to one quarter.
🌟
StarsLight from a star spreads as a spherical point wave. This is why stars appear dimmer with distance — intensity follows the inverse-square law.

Practice Problems

Easy1. A wave has frequency 5 Hz and speed 20 m/s. What is its wavelength in meters?

Divide the distance traveled in one second by the number of crests passing in that second.

Easy2. In a point-source wave in 3D, if the distance from the source doubles, the intensity becomes…

Square the distance multiplier to find how much the spherical area grows.

Medium3. Two point sources 0.4 m apart emit waves of wavelength 0.2 m in phase. At a point equidistant from both sources, the waves will…

The two sources emit crests at the same time. What meets at a point where both crests travel the same distance?

Challenge4. A point source of sound has intensity 16 W/m² at 2 m distance. What is the intensity at 8 m if the sound spreads evenly with negligible absorption?

Divide 8 m by 2 m to find the distance multiplier. Square it to find the area multiplier, then divide the starting intensity by that number.