1–6 String numbers
1 = thin high e; 6 = thick low E. Tune low to high: E2–A2–D3–G3–B3–E4.
Hybrid: build a chord and explore a scale together. Compare their notes, then strum a chord and play a melody.
Fret = where you press · Finger 1–4 = what you press with · R, ♭3, 5… = the note’s job. × = skip / mute; open = play without fretting.
Dot color coding (applies to every fretboard on this page)
Ready.
Fingers: 1 index · 2 middle · 3 ring · 4 little. Small numbers above the staff are fingers; numbers on TAB are frets. Pick ↓ ↑ alternately, or alternate i and m.
Read the staff and TAB together; click a note to hear it. Guitar notation sounds one octave below the written pitch. Each measure has four beats; rests finish incomplete measures. Scroll down for more measures.
These guitar patterns are inspired by Hanon’s practice approach. Start relaxed and slow; add 5 BPM after three clean repetitions. Stop if anything hurts. Scale sequences use the selected root and scale in the Scale instructor.
Builder
Place your own notes
Click any fret on a string to place a note there — you'll hear a synthesized pluck at that pitch. Click a string's label at the far left to toggle it between open (green dot) and muted (×). The lowest sounding pitch is the bass. If it is a chord tone other than the root, you have an inversion, such as C/E. A slash chord can also have a non-chord tone in the bass. Once you've placed some notes, use the playback buttons to hear the whole chord strummed or broken into an arpeggio.
Try it: place open E (string 6), fret 2 on A, fret 2 on D, fret 1 on G, open B, open e — that's E major (or press E under “Start from”). Now lower the G-string note to open: which note changed, and what chord is it now? For F♯ major, move every note up two frets, including the open strings: 2–4–4–3–2–2. Finger 1 barres fret 2; fingers 3, 4 and 2 fret A4, D4 and G3. Try the open Em shape first if a barre is not comfortable.
Scales & modes
Root note
View
The palette chords are picked from
A scale supplies notes for melodies and harmony. Start with major or minor pentatonic, one small position at a time. A mode is more than a starting note: its tonic must sound like home. D Dorian shares C major’s notes, but centers D. Compare modes on the same root to hear their different intervals.
Major and minor pentatonic scales have no half-steps; the blues scale adds a chromatic passing tone and does have half-steps. The library includes all seven major-scale modes plus common pentatonic, blues, harmonic minor and jazz melodic minor scales. The one-octave tab below gives you a concrete route for every selection.
Try it: pick D, then flip between Ionian and Dorian. Two notes change (F♯ → F and C♯ → C) — but the Dorian version instantly sounds moodier even though the root and the other five notes stayed put. Switch the view to Single position and set the fret to 0 to isolate the open-position box, then use Add position to the right to see how it connects to the next box up the neck.
Encyclopedia
Choose a root, chord type and inversion. Dots show intervals; badges suggest fingers. Try Em or Am, then strum or play an arpeggio.
Root note
Inversion
Chord type
Alternate fingering
This library covers common triads, suspended, sixth, seventh, add9 and power-chord families in all 12 pitch classes. It is a practical reference, not every possible named chord or tuning. Computed inversions include every formula tone; some traditional seventh grips omit the fifth. Advanced extensions and voicing choices are explained below.
Hear the triads of C major: C, Dm, Em, F, G, Am, B°. Compare their bass notes in each inversion. Neighboring scale triads do not necessarily share tones, and keeping the same inversion does not guarantee a small hand movement. Later, choose individual voicings to keep shared notes and reduce travel.
Progressions
In major keys, the triads are I · ii · iii · IV · V · vi · vii°. Capitals mean major; lowercase means minor; ° means diminished. I is home, IV and ii often lead away, and V often leads back. These are useful tendencies, not rules every song must follow.
Start with Em–Am, one chord per bar. Count “1, 2, 3, 4.” Change on the next 1. Then try a numbered pattern, or add exact grips from either chord explorer. Move chords earlier or later and listen to how the ending changes.
Ready. Each chord lasts one bar of four beats.
Arrange with your hands: retain a shared finger where comfortable, move the other notes the shortest practical distance, and slow the tempo before a difficult change. A mathematically short path is not always the most comfortable one. Compare two grips for the same chord in your progression.
Standard six-string tuning, equal temperament, no capo. Fingering is a suggestion; generated grips are screened for a four-fret window and at most four finger groups. This cannot certify comfort for every hand or instrument. Audio is synthesized, not a recorded performance.
The Guitar · All ages · Learn over several sessions
Learn how strings and frets work, read tab, make a clean note, and play music with steady time. Then explore chords, scales, melody, harmony, sound, and the guitar’s history.
Do one route well. History, modes, voicings, and the encyclopedia are references—not today’s checklist.
Use it on acoustic, classical, or electric guitar. Stop if either hand hurts.
Advance rule: three clean repetitions before adding 5 BPM. Buzzing or tension means slow down and reset.
Fretboard
Read the grid
In standard tuning, the six strings ring out (low to high) E, A, D, G, B, e when played open — no finger pressing anywhere. Pressing a string down at a fret shortens the vibrating length, which raises the pitch by one semitone per fret. Twelve frets up from any open string lands you on the exact same note name, one octave higher — the whole system just repeats.
1 = thin high e; 6 = thick low E. Tune low to high: E2–A2–D3–G3–B3–E4.
Where you press. This is the number written in tab. 0 = open.
1 index · 2 middle · 3 ring · 4 little finger, on either fretting hand. T sometimes means thumb. Picking hand: p thumb · i index · m middle · a ring; a pick can alternate down and up.
Hand tip: Place your fingertip just behind the fret wire, not on it. Use only enough pressure for a clear note. A barre uses one finger across several strings. If the hand tenses or hurts, release it and choose a smaller grip. Suggested fingers are starting points, not rules for every hand.
Ready to continue? Point to string 1, fret 3, then play it with finger 3. Say which number means string, fret and finger.
Hold & tune
Get ready to play
At any age
A good position lets the fretting hand reach every fret and the picking hand swing from the elbow without strain. Most beginners sit. Left-handed players mirror every instruction: the neck points the other way and the hands swap jobs.
Sit near the front of a chair with both feet flat. Rest the guitar’s curved waist on your right thigh (classical players use the left thigh, often with a footstool). The back of the guitar touches your body and the neck points slightly up, never down.
Rest the thumb on the back of the neck, roughly behind your second finger. Curve the fingers so the tips come down on the strings just behind the fret wire. Keep the wrist loose rather than sharply bent.
Hold a pick between the pad of the thumb and the side of the index finger, with only a little of the tip showing. Or pluck with the fingers: thumb (p) for the low strings, i, m and a for the high ones. Strum from the wrist and elbow, not the shoulder.
Tune every time you play, string 6 to string 1: E A D G B E. Use a clip-on tuner or a tuner app. If a string is sharp, go below the note and tune up to it; strings hold their pitch better that way.
One good sound first: play the open low E (string 6) four times, evenly, at a slow count. Then press string 1 at fret 3 with finger 3 and play that G four times. A buzz means the fingertip is too far from the fret wire; a dull thud means the finger is touching string 2, so curve it more.
Ready to continue? Play the open E string four even times, then string 1 at fret 3. Both should ring clearly with no buzz and no tension in your shoulders.
Tablature
Read the page
Guitarists read tablature (tab) from left to right, like a sentence. Each of the six lines is a string, drawn with the thin high e on top, and each number says which fret to press. Step through an example and watch where your hand goes.
Where your hand goes
Click any column in the tab, or press play.
Plain tab does not always specify rhythm; these examples use one column per beat. Click a column to step through it at your own pace.
5h7: hammer on from fret 5 to 7. 7p5: pull off from 7 to 5. 5/7: slide up. 7\5: slide down. b: bend (check the target pitch). ~: vibrato. x: muted/percussive note. These techniques change how a note begins or moves; learn the plain fretted notes first.
Ready to continue? Point to one column of tab and say it aloud as “string, fret” (for example “string 2, fret 1”), then play it.
Intervals
The distance between notes is the whole story
Pick any note and call it the root. Every other note in a chord is defined by how many semitones above the root it sits — that distance is called an interval. Change the intervals and you change the chord, no matter what root you started from. That's why a major chord "feels" the same whether it's built on C or on F#.
Click any fret on this ruler to hear it against the root.
Hear each one. Notice which feel dark, bright or stable.
The note the chord is named after.
A minor-ish, darker color.
A major-ish, brighter color.
The stable "backbone" of almost every chord.
A basic major triad is root + major 3rd + perfect 5th — semitone intervals 0, 4, 7. Flip that middle interval to a minor 3rd — 0, 3, 7 — and the chord becomes a minor triad. Everything below builds on this one idea.
Spelling note: Interval names count letter names as well as semitones. C–E♭ is a minor third; C–D♯ sounds the same in equal temperament but is spelled as an augmented second. The fretboard uses compact sharp pitch labels; use the formulas and correctly spelled examples here to learn the harmony.
Chord types
The formulas this lesson checks against
The builder and encyclopedia below both check what you play against these formulas (semitones above the root). Add the 4th note of a 7th chord and the color gets more complex; swap the 3rd out entirely for a 2nd or 4th and you get a suspended chord that feels unresolved on purpose.
Each strip is one octave of frets on a single string: cell 0 is the root, and a coloured cell is a chord tone that many frets higher.
Triad routes
A scale moves through the key’s seven notes. A triad takes every other scale note: a root, a third and a fifth. An arpeggio plays those chord tones one at a time. Keep the key, but change the three notes you aim for as the harmony changes.
First experiment: leave C major and I–ii–V–I selected. Play the route, then select ii. Notice that D–F–A are 2–4–6 in C major but 1–♭3–5 relative to D. The chord’s root is not always the key’s tonic.
Select any triad to explore it. Uppercase = major; lowercase = minor; ° = diminished. These qualities stay the same when you change major key.
Build up to eight bars. Repeats are welcome.
Ready. Each bar plays four quarter notes.
Root / 1Third / 3 or ♭3Fifth / 5 or ♭5Outlined notes = other scale tones
Read left to right. Each column is one quarter note. Numbers on strings are frets, including 0 for an open string; they are not finger numbers. Click a note to hear it.
“Nearest entry” minimizes the pitch jump into the next arpeggio within this fret window. It may begin on the third or fifth. This is a melodic entry choice; a chord inversion depends on the harmony’s lowest sounding note. It is not a claim that every full chord voice moves by a step.
In a major key, I can establish home, ii can prepare V, and V can lead back to I. Other routes are possible. Here V is a three-note major triad; adding a seventh makes V7, a separate chord type. Explore Music Lab or the piano chord lesson to transfer the same relationships.
Theory reference: Music Theory for the 21st-Century Classroom: diatonic chords in major. This workbench focuses on major keys; minor-key harmony has a different chord family.
Voicings
Inversion tells you which chord tone is lowest. Voicing tells you the register, spacing, order and doubling of all the notes. C–E–G and C–G–E are both root position if C is lowest. Triads have three bass positions; seventh chords have four.
Distinct chord tones fit within an octave.
Try: Learn a three-string triad; compare every bass position.
Chord tones span more than an octave. This does not mean open strings.
Try: Let bass and melody stand apart.
From four close voices, lower the second / third voice from the top by an octave.
Try: Compare the resulting bass position and string skips.
Use root, third and seventh; omit the fifth.
Try: Leave room for another instrument.
Omit the root when a bass player or context supplies it.
Try: Cmaj7 can use E–G–B; alone this also sounds like Em.
9 = 2 + octave, 11 = 4 + octave, 13 = 6 + octave; ♭/♯ alters a tone.
Try: C9 includes B♭; Cadd9 does not. C13 often uses C–E–B♭–A, omitting fifth, ninth and eleventh.
Guitar has six strings and four fretting fingers. A chord symbol describes harmony, not a demand to play every possible extension. Keep the defining third, seventh and requested color where appropriate; label omitted tones honestly.
Practice: choose C major, close voicing. Play root, first and second inversion. Sing the bass note each time. Then try Cmaj7 drop 2. Arpeggiate slowly to check every intended string rings.
Reflect
Exit ticket
Play, explain, repeat: play a clean four-note tab phrase; name a chord’s third; play a scale slowly up and down; then perform a four-bar progression twice without stopping. Lower the tempo until you can keep a steady pulse.
Triad route exit ticket: in C major, name ii’s notes and their key degrees. Which note do ii and V share? Which note do V and I share? Transpose I–ii–V–I to G major, then play the route using only chord tones.
You now know the pattern
A fully fretted shape can move as a unit; open-string notes must move too, usually with a barre or capo. Slide the F major barre shape up two frets and it becomes G major — nothing else changes. Try building chords in a song you know using only the encyclopedia above.
Open these whenever you need them. Your instrument settings stay in place.
History
Before the frets: where the guitar came from
Every guitar uses one simple plan: strings stretched along a neck, over a hollow body that makes them louder. Musicians in ancient Egypt played long-necked lutes built that way more than 3,000 years ago. Over the centuries the instrument kept changing in three ways: it gained strings, it changed how it was played (picking single notes or strumming chords), and it kept getting louder. The last change finally needed electricity.
Hear the guitar grow
The guitar grew by adding lower strings under the ones it already had. Strum each stage and listen to the chord get deeper and fuller. The highest strings keep the same spacing, a 4th, a 3rd, and a 4th, all the way through.
Each button strums the open strings with the spacing that era used: D–G–B–E, then A added below, then low E.
About 1450 BCE
Long-necked lutes appear in Egyptian and Mesopotamian art. Their players pressed strings against the neck to change the pitch, just as you press a string against a fret. Similar instruments spread across Persia, Central Asia, and the Mediterranean world.
700s → 1400s
From the 700s to the 1400s much of Spain, called al-Andalus, was ruled by Muslim kingdoms, and the oud came with them. Europeans adapted it into the lute. Even the word “guitar” traveled this road: the Greek kithara became the Arabic qītāra and then the Spanish guitarra.
1500s · Spain
Renaissance Spain had two guitar-shaped instruments. The vihuela had six courses, pairs of strings tuned together, and was used for serious solo music; Luis de Milán printed the first book of vihuela music in 1536. The small, cheap four-course guitar was for songs and dances. Its four courses had the same spacing as the top four strings of your guitar.
1600s → 1700s
Adding a fifth course gave the guitar enough range to play full chords, and players began to strum them with a sweeping motion called rasgueado. Guitar books printed letter codes for chord shapes, an early version of the chord charts in this lesson. Composers such as Gaspar Sanz wrote for it, and Antonio Stradivari, the famous violin maker, also built guitars.
About 1800 → 1890s
Around 1800, makers swapped the paired courses for six single strings and added a low E, giving the standard tuning you use today: E–A–D–G–B–E. Composers like Fernando Sor and Mauro Giuliani wrote concert music for it.
In the 1850s–1880s the Spanish builder Antonio de Torres Jurado made the guitar bigger and perfected a thin top held up by a fan of wooden strips, called fan bracing. The top could vibrate freely, so the guitar sounded louder and richer. Classical guitars are still built on his design.
1833 → 1930s · United States
Christian Frederick Martin, a German guitar maker, moved to New York in 1833 and later to Nazareth, Pennsylvania. His shop braced guitar tops in an X shape. In the early 1900s, steel strings replaced gut on many American guitars because they were louder and brighter. The X-brace could hold their extra pull. Big-bodied dreadnought guitars from the 1930s became the sound of folk, country, and bluegrass.
1920s
In the jazz bands of the 1920s, the guitar was buried under trumpets, saxophones, and drums. Inventors first tried to solve this without electricity. John Dopyera's resonator guitar (1927) used metal cones to make the strings ring louder, and blues players loved its bright, metallic sound.
1931 → 1940s
George Beauchamp built a pickup: a magnet wrapped in copper wire that turns a vibrating steel string into an electric signal. An amplifier and loudspeaker make that signal as loud as you like. His “Frying Pan” lap-steel guitar, built with Adolph Rickenbacker, went on sale in 1932, and Gibson's ES-150 (1936) put a pickup on a regular hollow guitar. Charlie Christian showed the world the guitar could now take a solo.
1950s → today
Turn a hollow electric guitar up loud and it starts to howl with feedback, because the body vibrates along with the speaker. A solid-body guitar barely vibrates, so it can play much louder. Leo Fender's Broadcaster (1950, soon renamed the Telecaster), the Gibson Les Paul (1952), and the Fender Stratocaster (1954) became the sound of rock and roll. Today you can choose a nylon-string classical, a steel-string acoustic, or an electric, and play the same chord shapes on all three.
Talk about it: Strumming chords became popular on the Baroque guitar more than 300 years ago, and the electric guitar was invented because guitars were too quiet. Pick one change from the timeline. What music could people play after it that they couldn't play before?
Learning goals
Materials
Extension
Listen to the same song played on a classical, a steel-string acoustic, and an electric guitar. Describe how each one sounds and why its build makes that sound. Compare the chord you built to its relative — an Am7 and a C6 share every note. Find another pair like it in the encyclopedia.
Key vocabulary
Your practice list
Add chords from the Encyclopedia and scales from Scales & modes below, then print a worksheet of just the ones you picked.
Nothing added yet.