Chemistry · Lesson 04

Catalysts & Activation Energy

Reaction Kinetics Activation Energy Arrhenius Equation Enzymes

Why can a reaction release energy and still happen slowly? Reactants must first cross an energy barrier. Explore how a catalyst changes the route, compare rates at the same temperature, and explain why faster does not mean more energy released.

1. A downhill reaction can still need a push

Breaking and rearranging bonds requires an initial investment of energy. The highest point on an energy diagram represents a transition state: an unstable arrangement between reactants and products. The barrier measured from the reactants to that point is the activation energy, Ea.

Before you test: If a catalyst lowers the hill, which should change: the speed of reaction, the energy released, or both? Make a prediction, then compare the two paths below.

Your route: Read the diagram → compare one variable at a time → explain a catalytic cycle → solve the rate challenge.

2. Same destination, a different route

Every chemical reaction has an energy barrier called the activation energy (Ea) — the minimum energy reactants need to start reacting. Think of it as a hill: reactants must climb the hill before they can roll down to become products.

What a Catalyst Does

A catalyst provides an alternate reaction pathway with a lower activation energy. It does not change the energy of the reactants or products — the overall energy change (ΔH) is identical. The start and end are the same; only the route is different.

Key rule: A catalyst participates in intermediate steps and is regenerated in the net reaction. It does not change ΔH or the equilibrium position at a fixed temperature. It speeds the approach to equilibrium in both directions. Real catalysts can lose activity through poisoning or degradation.

Watch the catalyst return

Reactant + catalyst → intermediate → product + catalyst

The catalyst temporarily binds or reacts, helps bonds rearrange, then becomes available for another cycle. Enzymes are biological catalysts, usually proteins. Their active site binds a substrate and stabilizes the transition state. The lock-and-key picture is a starting analogy; induced fit recognizes that the enzyme can change shape as it binds.

3. Compare the barriers and rates

Both routes start at 0 and finish at −20 kJ/mol. The dashed route has no catalyst; the solid route has a barrier 30 kJ/mol lower. Switch the catalyst on to compare at the same temperature.

Arrhenius model at the selected temperature
Routek (s⁻¹)Half-life
No catalyst
With catalyst

Model limits: Illustrative first-order reaction, A = 10¹² s⁻¹ for both routes, Ea,cat = Ea − 30 kJ/mol. Half-life = ln(2)/k. These are calculated rates, not measured particle counts. Real catalysts can change A and involve multiple steps; this diagram compresses those steps into one barrier. Temperature changes k here, not the plotted energy levels.

Rate multiplier1×
Ea (kJ/mol)80
CatalystOFF

4. Predict → test → explain

  1. Change the route. Reset, then turn the catalyst on. Record both barriers and the rate multiplier. Did ΔH change?
  2. Change the temperature. Leave the catalyst on and compare 300 K with 600 K using the Controls panel. Both rates increase. Does the catalyst’s relative advantage increase or decrease?
  3. Explain the evidence. Complete: “The reaction becomes faster because …; the energy released stays the same because …”.
Compare your explanation

The catalyst lowers the barrier from 80 to 50 kJ/mol at the default settings. At 300 K the model predicts about 167,000× faster; at 600 K about 409×. Raising temperature makes both routes faster, so the relative advantage shrinks. ΔH stays −20 kJ/mol because the reactant and product levels stay fixed.

Connect to molecular structure · Read the OpenStax explanation of catalysis

Real-World Applications

🚗
Catalytic Converters Platinum and palladium catalysts in car exhausts convert toxic CO and NOₓ gases into less directly toxic CO₂ and N₂ (CO₂ still contributes to climate change) at exhaust temperatures.
🌾
Haber Process An iron catalyst converts nitrogen (N₂) and hydrogen (H₂) into ammonia (NH₃) at ~450°C and 200 atm — a major source of nitrogen for fertilizers.
🧬
Enzyme Biology Digestive enzymes (amylase, lipase), DNA polymerase, and thousands of other enzymes run the chemistry of every living cell.
⚡
Fuel Cells Platinum catalysts enable hydrogen fuel cells to efficiently split H₂ and react it with O₂ to produce electricity, water, and heat.

5. Check your understanding

Use the Arrhenius equation: k = A·e−Ea/RT. R = 8.314 J/mol·K.

Easy1. A catalyst is consumed during the reaction. True or False?

Hint: A catalyst provides a lower-energy pathway but is regenerated — it is never consumed.

Easy2. What does a catalyst lower to speed up a reaction?

Hint: A catalyst creates an alternate pathway with a lower energy barrier for reactants to cross.

Medium3. The Arrhenius equation shows k = A·e−Ea/RT. If Ea is halved by a catalyst at T = 300 K, would the reaction rate increase or decrease?

Hint: A smaller exponent (−Ea/RT becomes less negative) means e−Ea/RT gets larger, so k increases.

Medium4. Enzymes are biological catalysts. What is the region on an enzyme where the substrate binds?

Hint: The lock-and-key model: the substrate (key) fits into the enzyme's active site (lock).

Challenge5. Without a catalyst Ea = 80 kJ/mol; with a catalyst Ea = 50 kJ/mol. At T = 300 K, by approximately what factor does the rate increase? Use k ∝ e−Ea/RT.

Hint: ratio = e(80000−50000)/(8.314×300) = e12.0 ≈ 167,000